|
|
Finishing Products
|
| Finishing products for timber can be broadly divided into oils and waxes or lacquers and varnishes. For advice on the pros and cons these please click here or ask us . At Broadleaf we stock a wide range of options for so that you can achieve just the finish you want. As well as interior finishes, we also have products suitable for use outside. |
|
For a hardwearing, natural looking finish that is easy to apply, stain resistant, water repellent and enhances the wood's natural colour, we recommend our own Broadleaf Hardwax Oil. Specially designed for wood floors, it dries in 4 -6 hours, has excellent coverage (2.5l = 2 coats over 30m2)
|
| |
|
|
We also stock OSMO Polyx oil, a hardwax oil which is similar to our own, but with a longer drying time (8-10 hours) and a slightly glossier finish. In addition, we stock OSMO Wood Wax Finishes which are a natural looking way to add subtle colour wood. Walnut lightly applied is ideal for creating a slightly aged look, and Birch whitens timber for a more contemporary feel. These are all available in 2.5l and 0.75l tins, with 2.5l offering 50m2 coverage. When used on flooring, we recommend 2 coats of Hardwax Oil to seal.
|
| |
|
|
Broadleaf recommend & stock the Bonakemi range of lacquer finishes. These are specialist products designed for use on flooring, and featuring flattening agents for a high quality result everytime. They are not suitable for use on vertical surfaces. |
| |
|
|
Resident (formerly Spectra) suits light to medium domestic use and is available in Matt, Silk Matt & Gloss options in both 1l and 5l. Coverage is approx 8-10m2 per litre. Bare timber should be undercoated with Bonakemi Prime before the application of Spectra.
|
| |
|
|
Mega suits medium to heavy domestic or commecial use and is available in Matt, Silk Matt & Gloss options in 5l. Silk Matt is also available in 1l. Coverage is approx 8-10m2 per litre. Bare timber should be undercoated with Bonakemi Prime before the application of Mega.
.
|
| |
|
|
Traffic is designed for areas of very high traffic (it was selected for use in Tate Modern) and has a minimal colour changing effect on timber. It is available in Matt or Silk Matt. Traffic is a 2 part finish, and we would recommend that it is applied by professionals. It is available in in 4.95l and coverage is approx 8-10m2 per litre. Bare timber must be undercoated with Bonakemi Prime before the application of Traffic.
|
| |
|
 |
Bonakemi H790 is a two part water based adhesive suitable for fixing all Broadleaf flooring products designated suitable for glue fixing. It is available in 5kg tubs and coverage is 1kg - 1.5kg per m2 depending on sub-floor. Note that this product has a short open time.
|
| |
|
 |
Bonakemi R850 is single part adhesive suitable for fixing all Broadleaf flooring products designated suitable for glue fixing. It is available in 15kg & 7kg and coverage is approx 1.25kg per m2 depending on sub-floor.
|
| |
|
 |
Sikabond T54 is a single part polyurethane adhesive, specially designed to cope with the stresses of underfloor heating and gluing wider boards. It is available in 13kg & 6kg tubs and coverage is 0.75kg - 1kg per m2. See Broadleaf glue fixing & underfloor heating advice for further information on appropriate uses.
|
| |
|
 |
Portanails are used with a Portanailer gun for secret nailing Broadleaf plank flooring. They are available in 50mm & 38mm. The latter should only be used when fixing to a timber subfloor less than 25mm thick under which there may be pipes in close proximity.
|
| |
|
 |
Fillers are used as part of the fitting process of most floors, unfinished and pre-finished, plank or parquet, to fill knots or gaps or just for a neat finish. It is important to use the right product for the right job to ensure a good result. Broadleaf stock a selection of fillers and are happy to offer advice if necessary. |
